Squire

Water heater

Hydronic buffer tanks are utilized to provide thermal storage volume when the system demand is less than the lowest firing rate of the boiler. This occurs most often when there are “micro” zones in the distribution system whose demand is below the minimum firing rate of the boiler. Under these conditions the boiler fires at its minimum rate, which is more energy than can be absorbed by the distribution system, and shuts off because of high return temperatures before the “micro” zone’s call for heat is satisfied. The boiler system continues to receive a call for heat and fires again. The “micro” zone cannot absorb all the energy produced by the boiler, and again the boiler shuts off because of high return temperatures. With the volume provided by the tank the additional energy not utilized by the “micro” zone can be stored in the buffer tank and used when there are additional heating demands

  • capacities from 30-120 gallons
  • 5 year limited warranty
see supplier page

Knight

Boilers

What is modulation? Let’s say your home is heated by a KNIGHT with 285,000 Btu/hr heating power. When it’s just “pretty cold” outside, the boiler starts by firing at a fuel-saving 57,000 Btu/hr, only 20% of its maximum heating potential. As the temperature drops to “really really cold,” KNIGHT is designed to “modulate” upward to the 100% maximum 285,000 Btu/hr of heating power

KNIGHT automatically adjusts its firing rate to exactly meet demand for heat.Modulation eliminates the frequent, noisy on/off cycling heard from boilers or forced-air systems that can only fire at 100%. This helps reduce wasted fuel,and ensures a (quiet KNIGHT) for your home.

see supplier page

Tank

Tank

Lochinvar’s glass lined, jacketed and insulated hot water storage tanks have been specifically engineered and constructed to provide a high volume supply of hot water at a constant outlet temperature. The unique Lock-Temp® baffle design is so effective that 80% of the storage volume can be utilized at the stored water temperature, regardless of the rate of outlet water flow

  • GLASS OR CEMENT LINED
  • ASME SECTION IV CONSTRUCTION
  • VERTICAL OR HORIZONTAL ORIENTATION
  • 125 OR 150 PSI WORKING PRESSURE
  • 5 YEAR LIMITED WARRANTY
  • Capacities from 80-5,000 Gallons
see supplier page

Con X us

Control systems

From the moment you log in …

CON-X-Us technology frees you from the mechanical room. The CON-X-US application communicates over the internet via Wi-Fi or hardwire. Using any smart device, you can link up with SMART SYSTEM controls boilers in multiple locations, for multiple customers. From a single boiler to an 8-unit cascade system, you’ll be able to check operating status or re-program boiler functions,from anywhere

see supplier page

Squire

Water heater

Hydronic buffer tanks are utilized to provide thermal storage volume when the system demand is less than the lowest firing rate of the boiler. This occurs most often when there are “micro” zones in the distribution system whose demand is below the minimum firing rate of the boiler. Under these conditions the boiler fires at its minimum rate, which is more energy than can be absorbed by the distribution system, and shuts off because of high return temperatures before the “micro” zone’s call for heat is satisfied. The boiler system continues to receive a call for heat and fires again. The “micro” zone cannot absorb all the energy produced by the boiler, and again the boiler shuts off because of high return temperatures. With the volume provided by the tank the additional energy not utilized by the “micro” zone can be stored in the buffer tank and used when there are additional heating demands

  • capacities from 30-120 gallons
  • 5 year limited warranty
see supplier page

Shield

Water heater

The Shield™ commercial water heater features an advanced water heating system beautifully packaged for the smallest possible footprint. The Shield is available in eight models in standard and ASME construction. All utility connections are located at the top of the appliance to reduce equipment room footprint and increase installation flexibility. The Smart Control™ offers a bright, clear LCD display with soft-key buttons and a wide variety of advanced control functions. Additionally, a large removable pump access panel as well as the control can be found in the front of the cabinet making serviceability a snap

  • EIGHT MODELS FROM
  • 125,000 TO 500,000 BTU/HR
  • NO EFFICIENCY LOSS FROM LIME SCALE
  • VIRTUALLY SILENT OPERATION
  • ADVANCED SMART CONTROL™
see supplier page

ArmorX2

Water heater

The ARMOR X2 Commercial Water Heater combines stainless steel heat exchanger technology with Modulating Condensing combustion to deliver efficiencies as high as 96%. With models at 1.0, 1.3 and 1.5 million BTU/hr inputs, ARMOR X2 will serve a large range of commercial applications and add the “green” touch that building owners and facility managers desire.ARMOR X2 delivers new levels of innovation with SMART TOUCH… touchscreen technology that puts total operational control at your fingertips! With Lochinvar SMART TOUCH, it’s easier than ever to set up a perfectly synchronized “green” system, and access a complete onboard database of real-time operational data and performance history. Other features of the ARMOR X2 include space-saving footprints, direct-vent design with intake and exhaust runs up to 100 equivalent feet, and a built-in cascading sequencer for up to 8 water heaters, delivering up to 12 million BTU/hr capacity

see supplier page

Armor

Water heater

ARMOR is a fully condensing commercial gas water heater. Available in eight models with inputs ranging from
150,000 to 800,000 Btu/hr, the ARMOR achieves thermal efficiencies up to 96%.

With standard tank-type water heaters, your choices are limited when it comes to matching input with storage capacity to meet “peak demand” delivery requirements. With ARMOR, you can match one or more water heaters with inputs ranging from 150,000 to 800,000 with one or more storage tanks in a wide variety of sizes. Lochinvar Lock-Temp® tanks are available to meet the need, from our 80-gallon vertical to the 5000-gallon vertical or horizontal model.

Another advantage of the ARMOR “dual component” system is lower replacement costs. Standard tank-type designs require replacement of the entire water heater. With ARMOR, you’ll save time and money by only replacing individual components as needed, such as the pump or storage tank

see supplier page

Knight XL

Boilers

The KNIGHT® XL, engineered with Lochinvar’s exclusive SMART SYSTEM™ control and an array of other innovative features, places it far ahead of any commercial heating boiler in its class. It promises and delivers ultimate ease of installation and maintenance. With up to 94.6% thermal efficiency, low-NOx emissions and a fully modulating burner, it is the best ”green choice” for today’s environmentally focused market.Five modulating/condensing stainless steel KNIGHT XL boilers are available with 399,000–800,000 Btu/hr inputs and remarkably small space-saving footprints. All are equipped for direct-vent installation with air intake and exhaust runs up to 100 feet using PVC, CPVC, Polypropylene or AL29-4C vent materials. This range of choices is ideal for light-duty applications such as small hotels, schools and office buildings. For higher-demand applications, up to eight KNIGHT XL units can be installed utilizing the built-in cascading sequencer to deliver up to 6.4 million Btu/hr heating capacity.THE KNIGHT XL BOILER reflects Lochinvar’s constant commitment to providing all the options you need to serve every application

see supplier page

Knight

Boilers

What is modulation? Let’s say your home is heated by a KNIGHT with 285,000 Btu/hr heating power. When it’s just “pretty cold” outside, the boiler starts by firing at a fuel-saving 57,000 Btu/hr, only 20% of its maximum heating potential. As the temperature drops to “really really cold,” KNIGHT is designed to “modulate” upward to the 100% maximum 285,000 Btu/hr of heating power

KNIGHT automatically adjusts its firing rate to exactly meet demand for heat.Modulation eliminates the frequent, noisy on/off cycling heard from boilers or forced-air systems that can only fire at 100%. This helps reduce wasted fuel,and ensures a (quiet KNIGHT) for your home.

see supplier page

FTXL

Boilers

Lochinvar re-defined the fire-tube boiler category with its KNIGHT Wall-Mount and CREST lines. For residential and light commercial applications, the FTXL™ adds models from 399,999 to 850,000 Btu/hr, and takes Lochinvar’s fire-tube technology to the next level. FTXL offers best-in-class AHRI Thermal Efficiency and footprints, plus remote connectivity that puts the SMART SYSTEM control at your fingertips, anywhere!

see supplier page

Crest

Boilers

Lochinvar ®has taken the fire-tube concept in an innovative new direction with the CREST modulating-condensing boiler. With sizes that range from 2.5 to 5.0 million Btu/hr, you have the opportunity to utilize Lochinvar leading-edge technology in your largest applications. With thermal efficiencies up to 99% in low water temperature applications,CREST is positioned to provide exceptional energy-saving performance.

The advanced CREST introduces a combustion system with a unique burner design with up to 20:1 turndown. The burner fires into an array of 316L stainless steel fire-tubes that transfer the heat to the surrounding water with exceptionally high efficiency.

CREST communicates seamlessly and in real time with building management systems by utilizing an on-board MODBUS protocol. The SMART TOUCH™ control has a built-in cascading component that communicates with up to eight units, providing total command without an external control or complex and expensive control logic programming by the BMS integrator. Yes, innovative fire-tube boiler technology integrated with our SMART TOUCH™ operating control makes the CREST a genuine game-changer among commercial boilers

see supplier page