Noble

BoilersBoilersWater heater

Lochinvar, LLC releases the NOBLE™ Fire Tube Combi Boiler for residential applications. With three models ranging from 110,000 to 199,999 Btu/hr., the Noble boiler offers easy installation and serviceability, true instantaneous response time and a user-friendly interface. In addition to 10:1 turndown and 95 percent Annual Fuel Utilization Efficiency (AFUE), the Noble Fire Tube Combi Boiler is designed, engineered and assembled in the USA. 

SEE SUPPLIER PAGE

XR3 Series Fittings

Piping

XR3 fittings are designed with a patented feature that when used with FlashShield CSST, contours the metal shield. This creates electrical continuity throughout the system. The XR3 fitting requires minimal torque for easy fitting installation. With no o-rings or gaskets, the reusable brass components provide a reliable metal-to-metal seat
 
• Straight Fittings connect the flexible gas tubing to gas supply, distribution manifolds or gas appliances.
• Couplings allow for the splicing and additions to the flexible gas tubing.
• Tee Fittings create a branch line on tubing runs.
• Termination Fittings create a fixed point “stub-out” on a wall or floor surface.
• Termination Bracket Fittings provide a secure attachment point for key-valves and as an alternate termination point.

Technical data sheet

Gastite® System Corrugated Stainless Steel Tubing (CSST)

Piping

Gastite® Corrugated Stainless Steel Tubing (CSST) supplies natural gas or LP gas to appliances. Gastite is a reliable, cost-effective system that can be installed in all modes of construction. Flexibility means quick and easy installations: Gastite® installs 30-70% faster than traditional piping methods.

• CSST flexible gas piping supplies natural gas or liquefied petroleum gas to appliances.

technical data sheet

WAV-0100

Control systems

Introducing the new HBX Wireless Outdoor Sensor, the WAV-0100. This wireless outdoor sensor goes against all conventional wireless technology. While others communicate only with their own devices, HBX has developed a way to broaden horizons. The WAV-0100 is able to connect to any control that uses a thermistor input for its outdoor sensing. Because of this revolutionary technology, the WAV-0100 can connect to boilers, reset controls, thermostats and many other devices. This makes the WAV-0100 perfect for retrofits as well as new installs.

CPU-0550 

Control systems

Introducing the simplest, most intuitive control available to the hydronic industry, the CPU-0550. The unique design means minutes to learn, minutes to setup. This control covers a wide variety of applications from a single unit, reducing the number of different controls on your shelf.

The CPU-0550 stand alone outdoor reset control accommodates staging, mixing, differential setpoint and pump sequencer applications in a condensed package with extensive flexibility.

Technical sheet

ORC-0100 

Control systems

The HBX ORC-0100 is designed to be an energy-saving automatic control for hot water boilers. The ORC-0100 measures the outside air temperature and re-adjust the heating system water to a minimum water temperature to satisfy the heat loss of the home or building.

THM-0100

Control systems

This diverse single stage heating/cooling THM-0100 Non-Programmable Thermostat is also designed around PID Algorithm theory and can also benefit applications requiring a single setpoint control. A single on board auxiliary sensor will allow for internal room, external floor, or outdoor sensing options.

SNO-0550

Control systems

Introducing the simplest, most intuitive control available to the industry, The SN0-0550 . This standalone snow melt control replaces the SNO-0500 at the same competitive price as the previous control, but with more features and benefits. This unique control uses a new step-by-step interface allowing for easy set up. With new preset snow conditions (Very Light, Light, Moderate and Heavy), it is simple to set the control to turn on the system based on snowfall intensity.

The new snow melt control utilizes the HBX Optical Snow Sensor (SNO-0110). This snow/ice sensor utilizes optics rather than continuity based on/off sensors typically used by other manufacturers. The sensor provides HBX snow melt controls with feedback on snowfall rate and Slab Temperature.

Concentric

Chimneys

Material & Construction

InnoFlue® Concentric integrates our industry leading InnoFlue® Single Wall, flame retardant, polypropylene technology and white powder coated metal outers. This integrated system allows both flue gases and fresh air to flow through a single component, reducing installation time and roof or wall penetrations.

InnoFlue® Concentric is ULC-S636 listed at zero clearance to combustibles, making it approved for use in Canada.

Concentric Vent Lengths and fittings are joined using high performance EPDM H1 gaskets which are suitable for service pressures up to 20 inches of water column (5000Pa) and are resistant to corrosive condensate.

InnoFlue® Concentric is used to vent individual appliances. InnoFlue® Concentric can be combined with InnoFlue® Single Wall and InnoFlue® Flex. For more information on system configurations, visit the InnoFlue® Concentric Solutions page.

Dimensions

  • Diameters: 2/4″ (60/100mm), 3/5″ (80/125mm), 4/6″ (110/160mm)
  • Concentric Vent Lengths (Effective Lengths): 1′, 2′ & 3′
Technical sheet

Flex

Chimneys

InnoFlue® Flex uses industry leading, flame retardant polypropylene technology to construct single wall, gasketed, flexible vent pipes and accessories. InnoFlue® Flex’s dynamic product line provides superior corrosion protection throughout. Lightweight polypropylene eliminates installation fatigue associated with most common venting materials, making it easy. The flexible properties of the Vent Length allow for the rapid lining of chimneys with offsets up to 45°. InnoFlue® is ULC-S636 listed at zero clearance to combustibles, making it approved for use in Canada.

Flexible Vent Lengths and fittings are joined using high performance EPDM H1 gaskets which are suitable for service pressures up to 20 inches of water column (5000Pa) and are resistant to corrosive condensate. 3″ and 4″ diameter Flex Vent Lengths have rigid sections every 2 feet. These rigid male sections can be inserted into any InnoFlue® Single Wall socket and allow for the easy transition between Single Wall and Flex. Once Centrocerin (installation lubricant) has dried the gaskets provide firm junctions between components.

InnoFlue® Flex is used to vent individual appliances. InnoFlue® Flex is commonly combined with InnoFlue® Single Wall but can also be combined with InnoFlue® Concentric. For more information on system configurations, visit the InnoFlue® Flex Solutions page.

Dimensions

Diameters: 2″ (60mm), 3″ (80mm), 4″ (110mm)

Available Lengths:

2″ Diameter

150′ Continuous Length
25′ Kit
35′ Kit
Custom Cut to Order

3″ Diameter

150′ Continuous Length
25′ Kit
35′ Kit
Custom Cut to Order

4″ Diameter

80′ Continuous Length
25′ Kit
35′ Kit
Custom Cut to Order

Technical sheet

Single Wall

Chimneys

InnoFlue® Single Wall Residential uses industry leading, flame retardant, polypropylene technology to construct single wall, gasketed, rigid vent pipes, fittings and accessories. InnoFlue® Single Wall’s dynamic product line provides superior corrosion protection throughout. Lightweight polypropylene eliminates installation fatigue associated with overhead installations of most common venting materials. InnoFlue® is ULC-S636 listed at zero clearance to combustibles, making it approved for use in Canada.

Vent Lengths and fittings are joined using high performance EPDM H1 gaskets, which are suitable for service pressures up to 20 inches of water column (5000Pa) and are resistant to corrosive condensate. Once Centrocerin (installation lubricant) has dried the gaskets provide firm junctions between components.

InnoFlue® Single Wall Residential can be configured to vent individual appliances or cascaded to form a common vent system. InnoFlue® Single Wall Residential can be combined with InnoFlue® Flex or InnoFlue® Concentric.

  • Diameters: 2″ (60mm), 3″ (80mm), 4″ (110mm) & 5″ (125mm)
  • Vent Lengths (Effective Lengths): 12″, 24″ 36″ & 72″
Technical sheet

Squire

Water heater

Hydronic buffer tanks are utilized to provide thermal storage volume when the system demand is less than the lowest firing rate of the boiler. This occurs most often when there are “micro” zones in the distribution system whose demand is below the minimum firing rate of the boiler. Under these conditions the boiler fires at its minimum rate, which is more energy than can be absorbed by the distribution system, and shuts off because of high return temperatures before the “micro” zone’s call for heat is satisfied. The boiler system continues to receive a call for heat and fires again. The “micro” zone cannot absorb all the energy produced by the boiler, and again the boiler shuts off because of high return temperatures. With the volume provided by the tank the additional energy not utilized by the “micro” zone can be stored in the buffer tank and used when there are additional heating demands

  • capacities from 30-120 gallons
  • 5 year limited warranty
see supplier page

Knight

Boilers

What is modulation? Let’s say your home is heated by a KNIGHT with 285,000 Btu/hr heating power. When it’s just “pretty cold” outside, the boiler starts by firing at a fuel-saving 57,000 Btu/hr, only 20% of its maximum heating potential. As the temperature drops to “really really cold,” KNIGHT is designed to “modulate” upward to the 100% maximum 285,000 Btu/hr of heating power

KNIGHT automatically adjusts its firing rate to exactly meet demand for heat.Modulation eliminates the frequent, noisy on/off cycling heard from boilers or forced-air systems that can only fire at 100%. This helps reduce wasted fuel,and ensures a (quiet KNIGHT) for your home.

see supplier page

Industrial Boilermag XT

Filtration

Ideal for large heating systems, Boilermag XT prevents the build-up of ferrous oxide and scale in central heating systems, reducing energy bills, increasing boiler life and reducing maintenance call outs.

Utilising our high performance flow technology , Boilermag XT ensures that virtually 100% of unwanted debris is removed from the system.

  • Easy to install and maintain
  • Maintains optimum heating performance
  • Range available from 2” to 8”
  • Operating pressure up to 12 bar
  • High intensity magnetic rods capture even the smallest particles
  • Large collection capacity
  • Comes with Boilermag 3 year warranty
  • No on-going running costs
  • Premium quality manufacture

For 1½” connections see Boilermag XL